Untitled Document

RM Series Three Phase Line Reactors
Utilizing Variable Speed Drives to control motor speed has impacted industry both in energy savings and increased efficiencies. The challenge for today's designers is dealing with non-linear wave shapes generated by solid-state devices.
By choosing a HPS RM series line reactor, many line problems such as nuisance tripping, line notching, harmonic distortion can be reduced or even eliminated. Additionally, performance, life expectancy and efficiency of both the motor and the drive itself are significantly enhanced. HPS's RM line reactors are available in standard ratings from 2 amps to 1200 amps (or 0.5HP to 1200HP).

Catalog Specs

Back to Top

RC Series DV/DT Filters
The HPS RC series DV/DT filters are specifically designed for drive/motor applications with long lead lengths (usually where the motor cable length is 20 feet and greater). They should always be installed next to the IGBT variable frequency drive. Typical installation applications include production process lines, conveyor systems and deep wells. Available in ratings from 2 amps to 600 amps, the RC series DV/DT filters combine appropriate values of inductance, capacitance and resistance to form a filter, which reduces DV/DT and peak voltages from the PWM voltage waveform. This combined with a 3% impedance reactor, which will reduce motor heating harmonics, will significantly increase the life of your motor.

Catalog Specs

Back to Top

Custom/Specialty Reactor Products
Hammond Power Solutions Inc. produces a wide range of standard three phase line reactors and DV/DT filters. However, this is just some of our capabilities. We take pride in our ability to manufacture, on a timely basis, custom designed and built reactors and filters for almost any application. If you have a need for a custom designed or non-standard line reactor, but do not see it listed here or in our related catalog, please send your detailed request to our quotations department and they will respond to it within 48 hours.